FOCKE WULF FW190A - Glow or EP

• INCLUDED AIR RETRACT LANDING GEAR
• WITH OLEO STRUTS
• ALL BALSA & PLYWOOD CONSTRUCTION
• COVERED IN A HEAT-SHRINK FILM WITH PRINTED GRAPHICS

The famous Luftwaffe 'Butcher bird' is lovingly recreated by Black Horse to look and behave just like the full size! The FW-190 was famous for its great performance as ease of handling, and this model is proud to re-create that. That wide-track, air retracting undercarriage (supplied) aligned with a careful choice of wing section and tail areas ensures the most docile of manners at all speeds.

When it's time to land, the split flaps are effective and predictable, taking the trauma out of landing a scale warbird fighter.

The stunning, authentic colour scheme is printed on durable adhesive vinyl, which is then sealed with a fuel proof coating. This method is tyried and tested and allows a level of scale realism that is just not possible in any other way.

As a first WWII fighter, the Black Horse FW-190A is hard to beat!
Construction is from laser cut balsa and ply parts covered in an authentic scale scheme printed on durable vinyl. By choosing vinyl, the FW-190 has all the scale details and colours that could not be replicated in heatshrink film. The vinyl is resilient and tolerant to hot days, yet is able to be slightly heatshrunk with care. That colour scheme is sealed to the surface with a durable fuel proof coating over the top. That large cowling is moulded in tough, yet light GRP and then painted in matching colours.

The choice of glow or EP power is up to you.


SPECIFICATIONS:

• Wingspan: 1780 mm
• Length: 1520 mm
• Weight: 5 – 5.6 kg
• Wing area: 51.9 dm2
• Wing loading: 96.34 – 107.9 g/dm2
• Wing type: Naca Airfoil
• Servo mount: 42 x 21 mm
• Landing gear type: Air retract gear with oleo struts and spring wire for tail gear (included)

Parts listing required (not included):

• Radio: 6 channels
• Servos: 8x
• Engine: 2-stroke 1.20 or 20–30 cc Gas
• Electric motor: Brushless outrunner 1800-2300W, 450KV
• Propeller: Suit with your engine

Recommended motor and battery set up (not included):

• Motor: RIMFIRE .120
• LiPo: 1x6S or 2x3S in series 4000-5000 mAh
• ESC: 80A