Hobbywing 30406900 – XRotor 3110 PRO 900kV 6S FPV Motor
Brushless FPV motor for 8–9 inch builds on 6S LiPo: 900 kV, up to 3.87 kg of thrust per motor and 100 g including leads.
The XRotor PRO 3100 series is Hobbywing's premium range of 31-size FPV motors, built for cinematic aerial filming, heavy camera payloads and competition. Hand-wound windings with a high slot fill, N52SH arc magnets and 0.1 mm low-loss stator laminations give more thrust and higher efficiency, and a self-cooling bell keeps temperatures down under heavy load. This 900 kV version runs on 6S with 8–9 inch tri-blade propellers and gives up to 3.87 kg of thrust per motor.
Features
- Fully hand-wound windings with a high slot fill
- N52SH arc magnets for strong, heat-resistant performance
- 0.1 mm low-loss silicon steel stator laminations
- Titanium alloy shaft (5 mm)
- Self-cooling fin structure in the bell
- 220 °C C-class enamelled wire, 12N14P configuration
- Sold individually – a quadcopter needs four motors
Specifications
- KV: 900 kV
- LiPo: 6S (24 V)
- Motor size: Ø37.2 × 29.2 mm
- Weight: 100 g (incl. leads)
- Rated power: 280 W
- Max power: 1686 W (8 s)
- Max current: 70.4 A (8 s)
- Max thrust: 3.87 kg (9×5×3 propeller)
- No-load current: 1.78 A
- Internal resistance: 45 mΩ
- Shaft: Ø5 mm, 17 mm long
- Mounting: 4 × M3 on Ø19 mm
- Leads: 18 AWG, 250 mm
- Recommended propellers: 8×4.5×3, 9×4×3, 9×5×3 (tri-blade)
- Recommended ESC: Hobbywing XRotor FPV G2 65A 4in1
Max power and max current are full-throttle values at an ambient temperature of max. 25 °C, measured for the time stated in brackets.
In the box
- 1 × XRotor 3110 PRO 900 kV motor
- Propeller nut and mounting screws
