Hobbywing 30406904 – XRotor 3120 PRO 1000kV 6S FPV Motor
Brushless FPV motor for 9–10 inch builds on 6S LiPo: 1000 kV, up to 6.29 kg of thrust per motor and 158 g including leads.
The XRotor PRO 3100 series is Hobbywing's premium range of 31-size FPV motors, built for cinematic aerial filming, heavy camera payloads and competition. Hand-wound windings with a high slot fill, N52SH arc magnets and 0.1 mm low-loss stator laminations give more thrust and higher efficiency, and a self-cooling bell keeps temperatures down under heavy load. The 3120 is the largest motor in the PRO 3100 series. This 1000 kV version runs on 6S with 9–10 inch tri-blade propellers and gives up to 6.29 kg of thrust per motor.
Features
- Fully hand-wound windings with a high slot fill
- N52SH arc magnets for strong, heat-resistant performance
- 0.1 mm low-loss silicon steel stator laminations
- Titanium alloy shaft (5 mm)
- Self-cooling fin structure in the bell
- 220 °C C-class enamelled wire, 12N14P configuration
- Sold individually – a quadcopter needs four motors
Specifications
- KV: 1000 kV
- LiPo: 6S (24 V)
- Motor size: Ø37.2 × 39.2 mm
- Weight: 158 g (incl. leads)
- Rated power: 620 W
- Max power: 2930 W (21 s)
- Max current: 122.2 A (21 s)
- Max thrust: 6.29 kg (10×5×3 propeller)
- No-load current: 3.9 A
- Internal resistance: 21.5 mΩ
- Shaft: Ø5 mm, 17 mm long
- Mounting: 4 × M3 on Ø19 mm
- Leads: 16 AWG, 300 mm
- Recommended propellers: 9×4.5×3, 9×5×3, 10×5×3 (tri-blade)
- Recommended ESC: Hobbywing XRotor FPV G2 65A 4in1 or XRotor FPV 100A 4in1 8S Lite
Max power and max current are full-throttle values at an ambient temperature of max. 25 °C, measured for the time stated in brackets.
In the box
- 1 × XRotor 3120 PRO 1000 kV motor
- Propeller nut and mounting screws
