RLT8SM1-1 - T8S Mode-1 RC Transmitter Incl. LiPo & 2x R8EF Receivers
- 8 channels
- Handle Remote Controller
- Compatible receivers: R16F, R16SM, R12F, R8EF, R8XM, R8FM, R8SM, R8FG, R8FGH, R7FG, R6FG, R6F & R4FGM
2KM Control Distance
T8S(BT), with the same FHSS algorithm of AT9S Pro and 67 channels pseudo-random frequency sequence hopping, the chip TI CC2500 (same as the Open TX Frsky X9D), and the transmission rate (which is three times faster than Open TX), achieving better anti-interference ability to both the same frequency band and different frequency bands. The control distance of T8S(BT) is 2000 meters in free air.
0.25us Gimbal Precision
The optimal design of the PCB layout ensures a maximum PWM jitter of 1.84us with a standard deviation of just 0.25us. It is 14 times better than regular jitter 7us f the mainstream 16-channel transmitter in the market. The same joystick components as AT9S Pro.
APP Parameter Setup, USB Upgrade
Parameters can be easily set up and modified with an Android or iOS mobile APP connected via Bluetooth. USB upgrades with new functions added, and keeps T8S always advanced. Countless sets of model data can be stored.
The Mobile APP is Android and iOS supported. Displayed language depends on your mobile language.
- Firmware upgrade and parameter setup computer APP are only available to systems of Windows 7, 8, 10, 11, or XP.
- Unlimited models can be stored.
Real-time Built-in Telemetry
Real-time model data feedback function allows users to receive the transmitter voltage and RSSI information. When paired with receiver R16F, R8FGH, R8FG, or R7FG, the model voltage will display on the mobile phone APP.
Four Programmable Mixing Function
Channels 5 to 6 can be programmed to any advanced setting. Default mix function, such as aileron mix with elevator or flap mix with aileron for Fixed Wings or V-Shaped tail models. Four programmable mixing functions and unlimited model storage make T8S perfectly compatible with most kinds of cars or boats, such as an Engineering Truck or dual-motor bait boat.
Adapts to Multiple Models
Adaptable models include Helicopters, Fixed-Wings, Gliders, Multicopters, Cars, Boats, and Robots. The transmitter automatically switches layout depending on the selected mode. The receiver with a 21cm antenna is also perfect for easy RC boat control.
Compatible with Multiple Receivers - SBUS/PPM/PWM Supported
Standard receiver R8EF supports SBUS, PPM, and PWM signals output, no need for extra cables or any signal converter, reducing the weight of the aircraft. When outputting the SBUS and PPM signals, channels 3 to 8 can also output corresponding PWM signals at the same time and work with the T8S turn switch to control PTZ and landing gear. With the T8S in hand to have all functions, R/C fans can fully enjoy with fun!
Ergonomics Design
Perfect ergonomics design with the small size and moderate weight, and the removable joysticks personalized to players’ hands and control habits make the long flight more pleasant.
USB Charging
The built-in 1S 900mAh lithium battery can be directly charged by a computer or mobile charger with a USB cable. When the voltage is less than 3.7V, the green battery indicator will flash with Dee sound as an alarm.
Long Flight Time
The brand new hardware design of T8S has super low battery consumption of 150mA. Total flight time lasts 5 hours when the battery is fully charged.
T8S Transmitter Specs:
- Size: 162.5x95.5x57mm
- Weight: 142g
- Channels: 8, 5-8 channels can be programmed
- Signal Output: PWM, SBUS & PPM
- Adaptable Models: Helicopters, Fixed-wings, Gliders, Multicopters, Cars, Boats, and Robots
- Output Frequency: 2.4GHz ISM band (2400MHz~2483.5MHz)
- Spread Spectrum: FHSS 67 channels pseudo-random frequency hopping
- Section Precision: 4096, 0.25us/section
- Modulation Mode: GFSK
- Channel Band Width: 400KHz
- Channel Pacing: 1200KHz
- Transmitter Power: <100mW (20dBm)
- Reception Sensitivity: -104dBm
- Adjacent Channel Rejection: >36dBm
- Transmission Rate: 38kbps
- PWM Output Range: 1.0ms~2.0ms
- Cycle: 15ms/ frame
- Battery: Built-in 1S Lithium 900mAh (charged by USB 5V)
- Operating Voltage: 3.7-4.2V
- Operating Current: <150(±5)mA
- Control Distance: About 2000 meters in the air (actual distance depends on the flight environment)
- Simulator Supported: When bound with receiver R16F/R12F, support open-source simulators such as TRYP FPV, AeroFly, Uncrashed, Liftoff, FPV LOGIC, and Velocidrone - compatible with macOS and Windows systems, no external dongle needed.
- Compatible Receivers: R8EF (Standard), R16F, R16SM, R12F, R8FM, R8SM, R8XM, R8FG, R8FGH, R7FG, R6FG, R6F, R4FGM
- Compatible Control Board Hardware Models: Ardupilot, pix4, beta, Arduino, and Raspberry Pi, can be connected with SBUS signal
- Operating Temperature：-30° to 85°C
R8EF Receiver Specs:
- Size: 41.5x21.5x11.5mm
- Antenna Length: 210mm
- Weight: 7g
- Channels: 8
- Signals: SBUS, PPM & PWM
- Operating Voltage: 3-15V
- Operating Current: 38-45mA@5V
- Output Frequency: 2.4GHz ISM band(2400MHz~2483.5MHz)
- Spread Spectrum: FHSS 67 channels pseudo-random frequency hopping
- Section Precision: 4096, 0.25us per section
- Adaptable Models:Helicopter, Fixed-wing, Glider, Multicopter, Car, Boat, Robot
- Control distance: 2000 meters in the air (Maximum range tested in unobstructed areas free of interference and may vary depending on local regulations).
- Compatible transmitters: T16D, T12D, T8FB, T8S, RC8X, RC6GS V3, RC4GS V3, RC6GS V2, RC4GS V2, RC6GS, RC4GS
- Operating Temperature: -30° to 85°C