Traxxas 97054-1-XBLU – TRX-4M Land Rover Defender 1/18 Crawler RTR – X-Blue
1/18 scale 4WD scale crawler with licensed Land Rover® Defender® hard body, steel ladder frame, 4-link suspension and oil-filled shocks. Ready-To-Race® with TQ™ 2.4 GHz radio, 7.4 V 750 mAh 2-cell LiPo battery with iD® and 2-amp USB charger.
TRX-4M® brings the scale realism and trail capability of the larger TRX-4® down to 1/18 scale. A steel ladder frame, solid steel axles and oil-filled shocks let it climb over rocks, through grass and across shallow streams outdoors, and the 45° steering angle and smooth throttle make it just as much fun on an indoor course. The licensed Land Rover® Defender® hard body is molded in color and detailed with side mirrors, door handles, wipers, fender flares, rock sliders and LED lights in the bumper. This version comes in X-Blue.
TRX-4M is rated skill level 1 and no previous RC experience is required. The 2S LiPo battery gives over an hour of driving per charge and is charged with the included USB charger, so only four AA batteries for the transmitter and a USB power source are needed. The compact size makes it easy to take along anywhere.
Features
- Licensed Land Rover® Defender® ABS hard body with molded-in color that will not chip or flake, fender flares, rock sliders, side mirrors, door handles, wipers and LED bumper lights
- Heavy-duty latching body clips that hold tight on the trail and release in seconds
- Waterproof ECM-2.5™ electronic control module that combines ESC, receiver and LED controller in one unit
- Three drive profiles: Sport (forward, brake, reverse), Trail (forward, brake, reverse with drag brake in neutral) and Crawl (forward, instant reverse with 100 % hill-holding brake)
- Traxxas EZ-Set® one-button setup, built-in Pro Scale® LED control, two-stage low-voltage protection and motor overload protection
- Full-size TQ™ 2.4 GHz 2-channel transmitter for comfortable, precise control
- Titan® 180 87-turn brushed motor with fixed gear mesh, mounted forward for better crawling balance
- Heavy-duty steel C-channel ladder frame running from bumper to bumper
- Full-time shaft-driven 4WD with solid steel axles, locked spools front and rear and heavy-duty CV center driveshafts
- Heavy-duty 2065T steering servo with metal main gear, direct steering and a 45° steering angle
- Triangulated 4-link suspension front and rear with heavy-duty rod ends
- Oil-filled GTM™ shocks for smooth damping and realistic body movement, with adjustable preload spacers
- Detailed 1-inch wheels with 7 mm hex and Canyon AT tires in a trail-tuned rubber compound
- Low-CG battery tray with wide rubber strap that keeps the battery in place
- Optional low-range or speed-gearing transmissions (sold separately) that swap in minutes
- Low-maintenance self-lubricating bushings and hex hardware
Included
- TRX-4M Ready-To-Race® with licensed ABS hard body
- Titan® 180 87-turn motor and ECM-2.5™ electronic control module
- TQ™ 2.4 GHz transmitter
- 7.4 V 750 mAh 2-cell LiPo battery with iD®
- 2-amp USB charger with iD®
- Maintenance tools
Required (not included)
- 4 x AA alkaline batteries for the transmitter
- USB-A power source with at least 2 A at 5 V
Specifications
- Scale: 1/18
- Type: Trail / crawler, 4WD
- Skill level: 1
- Length: 279 mm
- Width / track: 124 mm
- Height: 135 mm
- Wheelbase: 155 mm
- Ground clearance: 29 mm
- Weight: 483 g
- Driveline: Shaft-driven 4WD, locked spools front and rear
- Transmission: Single speed direct drive, internal gear ratio 11.38:1
- Gear pitch: 64 pitch
- Steering servo: 2065T
- Motor: Titan® 180, 87-turn brushed
- ESC: ECM-2.5™, brushed, waterproof
- Battery: 2S LiPo 7.4 V 750 mAh with iD® (included)
- Battery compartment: 51 x 31 mm
- Radio system: TQ™ 2.4 GHz, 2 channels
