SRT BH927S - HV Brushless Servo 0.075 s/60° / 23.0 kg/cm @ 7.4 V
The SRT BH927S is a HV brushless servo for 1/8 Nitro Buggy and 1/8 Electric Buggy. It measures 40 x 20 x 38.0 mm and weighs 70.0 g. At 7.4 V it delivers 23.0 kg/cm of torque and 0.075 s/60°.The brushless motor draws very little current and has no carbon brushes to wear out. The gear train is titanium and steel and the output shaft runs in two ball bearings. As an HV servo it can be powered directly from a 2S LiPo pack, and at 8.4 V it delivers 27.0 kg/cm.
Features:
- Brushless motor with low power consumption
- Dual NMB ball bearings
- Titanium and steel gear train
- Superior holding torque
- Supports the SXR ultra high speed mode
- HD 4096 resolution
Applications:
- 1/8 Nitro Buggy
- 1/8 Electric Buggy
Technical details:
- Type: Digital
- Motor type: Brushless
- Bearings: 2 NMB ball bearings
- Gear type: Metal
- Gear material: Titanium & steel
- Control system: Pulse width control (PWM)
- Working frequency: 1520 µs / 330 Hz
- Operating voltage: DC 6.0-8.4 V
- Operating temperature: -10 to +60 °C
- Speed @ 6.0 V: 0.10 s/60° (no load)
- Speed @ 7.4 V: 0.075 s/60° (no load)
- Speed @ 8.4 V: 0.07 s/60° (no load)
- Torque @ 6.0 V: 21.0 kg/cm (291.6 oz/in)
- Torque @ 7.4 V: 23.0 kg/cm (319.4 oz/in)
- Torque @ 8.4 V: 27.0 kg/cm (374.9 oz/in)
- Potentiometer drive: Direct drive
- Dimensions (LxWxH): 40 x 20 x 38.0 mm
- Weight: 70.0 g
- Connector / cable length: JR, 300 mm
