RadioLink R6DS 6/10-Channel Receiver
The RadioLink R6DS is a compact, lightweight 2.4 GHz receiver for RC models where low weight, a stable signal and flexible signal output matter. Weighing just 3.4 g and measuring only 25 x 15 mm, it fits even in smaller models such as racing drones, gliders and other compact RC builds.
The R6DS supports PWM, SBUS and PPM, which makes the receiver flexible for many different types of installation. It can be used with helicopters, airplanes, gliders, multirotors, cars, boats and robots, among others.
- Up to 600 m range in the air under optimal conditions
- DSSS and FHSS hybrid spread spectrum for a stable, interference-resistant signal
- 6 channels via PWM
- Up to 10 channels via SBUS/PPM/PWM configuration
- Compact form factor – only 25 x 15 mm
- Low weight – only 3.4 g
- Real-time RSSI telemetry
- Compatible with several RadioLink transmitters
Stable signal with up to 600 m range
The R6DS uses DSSS and FHSS hybrid spread spectrum with 16 channels for pseudorandom frequency hopping and QPSK modulation. This contributes to stable signal transmission and strong interference protection for the receiver's channels.
The range is specified at up to 600 m in the air. Maximum range is tested in open areas without interference and may vary depending on installation, antenna placement, surroundings and local regulations.
6/10 channels with PWM, SBUS and PPM
The RadioLink R6DS can be used with 6 channels for PWM signal output or up to 10 channels with SBUS, PPM and PWM. This makes the receiver flexible for both simpler RC models and more advanced installations where several signal types are needed.
The receiver is suitable for several different model types, including helicopters, airplanes, gliders, multirotors, cars, boats and robotics projects.
Small and light for compact models
Weighing just 3.4 g and with a very compact form factor, the R6DS is easy to fit into small models. It is particularly well suited to builds where low weight and limited space are important factors, for example racing drones and gliders.
Real-time RSSI telemetry
The R6DS supports real-time RSSI information, which makes it possible to get important information about signal status from the model. This gives you a better overview and can contribute to safer use.
Compatible RadioLink transmitters
The RadioLink R6DS is compatible with several RadioLink transmitters and is therefore a convenient choice for users who already run RadioLink systems.
- AT10II
- AT10
- AT9S Pro
- AT9S
- AT9
Suitable for many RC models
- Helicopters
- Airplanes
- Gliders
- Multirotors
- RC cars
- RC boats
- Robotics projects
- Racing drones and other compact builds
Technical specifications
- Model: RadioLink R6DS
- Product type: 6/10-channel receiver
- Size: 25 x 15 mm
- Antenna length: 90 mm
- Weight: 3.4 g
- Channels: 6 channels via PWM, up to 10 channels via SBUS/PPM/PWM
- Signal output: SBUS, PWM and PPM
- Operating voltage: 3.7 V
- Operating current: 38–45 mA @ 5 V
- Frequency band: 2.4 GHz ISM band
- Spread spectrum mode: DSSS and FHSS
- Channel resolution: 4096 with 0.25 μs per section
- Control range: Up to 600 m in the air under open, interference-free conditions
- Applicable models: Helicopter, airplane, glider, multicopter, car, boat and robot
- Compatible transmitters: AT10II, AT10, AT9S Pro, AT9S and AT9
Good to know
Maximum range is tested in open areas without interference. The actual range may vary depending on model, installation, antenna placement, surroundings and local regulations.
Always check that the receiver is compatible with your transmitter and that the correct signal type is selected for your model before use.
Summary
The RadioLink R6DS is a small, lightweight receiver for RC models where a compact form factor, a stable signal and flexible signal output matter. With support for PWM, SBUS, PPM and RSSI telemetry, it is particularly well suited to smaller flying models, multirotors, racing drones and other hobby projects.
