RadioLink R6F 6-channel receiver
The RadioLink R6F is a compact 2.4 GHz receiver for RC cars, boats and robot projects. It is designed for stable control, low latency and reliable signal transmission in models where PWM output and easy installation are important.
With FHSS spread spectrum technology, 67-channel pseudorandom frequency hopping and up to 400 meters of range under optimal conditions, the R6F is a convenient choice for many different ground and boat models.
- 6-channel receiver with PWM signal output
- Up to 400 meters of range under optimal conditions
- FHSS spread spectrum with 67-channel pseudorandom frequency hopping
- Built-in real-time telemetry for RSSI and receiver voltage
- Wide operating voltage range: 3–15 V DC
- Support for HV servos
- Compact and light – only 35 x 20 x 13 mm and 6 g
- Compatible with several RadioLink transmitters
Stable control with up to 400 meters of range
The R6F uses FHSS spread spectrum technology and 67-channel pseudorandom frequency hopping to reduce signal interference and provide stable control. The technology contributes to good interference resistance, even when several users are operating at the same time.
The range is specified at up to 400 meters. The maximum range is tested in open areas without interference and can vary depending on the model, installation, antenna placement, surroundings and local conditions.
Low latency and a precise signal
The R6F is designed for fast and responsive control in RC cars, boats and robots. It has 4096-step channel resolution with 0.25 µs per section, which contributes to smooth and precise control.
The low latency between transmitter and receiver gives a more direct control feel and is a particularly good fit for driving where response is important.
Real-time telemetry
The R6F has built-in real-time telemetry for RSSI and receiver voltage. This makes it possible to follow important information about the model's signal status and power supply directly via a compatible transmitter.
The wide operating voltage range of 3–15 V DC makes the receiver flexible and provides support for HV servos in compatible installations.
Compact receiver for ground and boat models
With a size of 35 x 20 x 13 mm and a weight of only 6 g, the R6F is easy to fit even in smaller models. It is a particularly good fit for RC cars, crawlers, tanks, tracked vehicles, boats and robot projects.
Compatible RadioLink transmitters
The RadioLink R6F is compatible with several RadioLink transmitters, both for ground models and certain T-series transmitters.
- RC8X
- RC6GS V3
- RC4GS V3
- T16D
- T12D
- T8FB
- T8S
- RC6GS V2
- RC4GS V2
- RC6GS, version with 3-position switch
- RC4GS, version with P.D after 180101
Suitable for several model types
- RC cars
- Crawlers
- Tanks
- Tracked vehicles
- RC boats
- Robot projects
Technical specifications
- Model: RadioLink R6F
- Product type: 6-channel receiver
- Size: 35 x 20 x 13 mm
- Antenna length: 205 mm
- Weight: 6 g
- Channels: 6
- Signal output: PWM
- Operating voltage: 3–15 V DC
- Operating current: 30 mA at 5 V
- Telemetry: Built-in real-time telemetry for RSSI and receiver voltage
- Frequency band: 2.4 GHz ISM band, 2400–2483.5 MHz
- Spread spectrum: FHSS, 67-channel pseudorandom frequency hopping
- Channel resolution: 4096 with 0.25 µs per section
- Range: Up to 400 m under open, interference-free conditions
- Operating temperature: -30 °C to 85 °C
- Compatible models: Car, including crawlers, tanks and tracked vehicles, boat and robot
- Compatible transmitters: RC8X, RC6GS V3, RC4GS V3, T16D, T12D, T8FB, T8S, RC6GS V2, RC4GS V2, RC6GS and RC4GS
Good to know
The maximum range is tested in open areas without interference. The actual range can vary depending on the model, installation, antenna placement, environment and signal conditions.
Always check that the receiver is compatible with your transmitter and that the correct model type and channel settings are used before driving.
Summary
The RadioLink R6F is a compact and light 6-channel receiver for RC cars, boats and robot projects. With FHSS frequency hopping, PWM output, real-time telemetry and support for several RadioLink transmitters, it is a practical choice for stable control in ground and boat models.
