MENY
Seaking 60A V3.1 2-3S Vattenkylt Båtreglage i gruppen Fabrikat / H / Hobbywing / Fartreglage hos Minicars Hobby Distribution AB (HW30302200)
HOBBYWING
Ja

Seaking 60A V3.1 2-3S Vattenkylt Båtreglage

Artnr:
HW30302200
Lev.artnr:
30302200
Lagersaldo:
35 st
Cirkapris: 816 kr
  • Information
    • Hobbywing Seaking 60A V3.1 Marine ESC

      Performance & Reliability

      Built with high-quality components and coupled with cutting-edge firmware, the Seaking 60A V3.1 is featured by unmatched performance and reliability. Multiple safety adjustable options are in use, with the implementation of the low-voltage cutoff protection, thermal protection and throttle signal loss protection.

      Efficient Cooling System
      The Hobbywing patented heat-conductive copper bar cover on the power board of the Seaking 60A V3.1 can efficiently and effectively transfer heat to the integrated CNC machined billet aluminum water cooled heat sink housing thus keeping your ESC as cool as possible.

      Waterproof Design and Built-in BEC
      100% waterproof without the need of extra protection. The built-in switch mode BEC with a maximum output of 6Amp and voltage of 6V make this ESC compatible with high voltage servo.

      Special Algorithm Design
      The special algorithm implemented in the ESC make the acceleration more incredible and sailing more stable.

      Separate PRG/FAN Port
      The separate PRG/FAN port on the ESC can connect ESC to a program box (via the trio-color programming cable) and start ESC programming.


      Specifications

      • Brushed/Brushless: BL
      • Waterproof: Yes
      • Cont./Peak Current: 60A/360A
      • Input: 2-3S LiPo, 5-9 Cells NiMH
      • BEC Output: Linear Mode:6V/3A
      Wires & Connectors
      • Input Wires: 14AWG 150mm
      • Output Wires: 14AWG 100mm
      • Input Connectors: No
      • Output Connectors: No
      (Note: All the wire length above is the original length not the length you see from the outside.)

      ESC Programing via

      • Transmitter: Supported
      • LED Program Box: Supported
      • LCD Program Box: Not Supported
      • WiFi Module: Not Supported
      • Program Port: Separate Program Port

      Firmware

      • Firmware Upgrade: Not Supported

      Size & Weight

      • Size: 60.5 x 38.5 x 25.6mm
      • I.D./O.D. of the Water Cooling Pipe: Ф2.0/4.0 mm
      • Weight: 95g

      Applications

      • Boat Length <70cm

      Installation & Connection

      Connect the ESC, motor, receiver, battery and servo according to the wiring diagram below (Picture 1/2). Three wires from the ESC to the motor have no polarity, so you can connect them freely. Please recheck all the connections and ensure they are correctly connected before proceeding to step 2. (And you may find it’s necessary to swap two wires if the motor runs in reverse.)

      For safety, please always keep the propeller away from human body or any other objects.
      Red color input wire is positive pole, Black color input wire is negative pole.





      1) Picture 1 is for Seaking-30A-V3, Seaking-60A-V3 and other ESCs that work with one LiPo battery pack; that is a wiring diagram with 1 battery pack.
      2) Picture 2 is for Seaking-120A-V3, Seaking-180A-V3, Seaking-130A-HV-V3(without switch) and other ESCs that may work with two LiPo battery packs; that is the wiring diagram with 2 battery packs.
  • Egenskaper
  • Delar
  • Populära Tillbehör
  • Nedladdningar
  • Flik
Se fler varor
Seaking 30A V3 2-3S Vattenkylt Båtreglage
Cirkapris: 474 kr
HOBBYWING
Seaking 120A V3 2-6S Vattenkylt Båtreglage
Cirkapris: 1097 kr
HOBBYWING
Seaking Pro 120A 2-6S Mono1 Båtreglage
Cirkapris: 1275 kr
HOBBYWING
Seaking 180A V3 2-6S Vattenkylt Båtreglage
Cirkapris: 1505 kr
HOBBYWING