Traxxas 93424-4-BLK – 4-Tec 2.0 Nissan 240SX VX3 1/10 AWD Brushless RTR – Black
1/10 scale AWD brushless on-road car with licensed clipless Nissan® 240SX body, Velineon® VX3 3S power system, TQi™ Sport radio and Traxxas Stability Management (TSM®). Battery and charger sold separately.
4-Tec® 2.0 Nissan® 240SX puts a detailed replica of the S13 240SX on the 1/10 scale 4-Tec 2.0 chassis. The Velineon® 3S system reaches 35+ mph (56+ km/h) on a 2S LiPo and 50+ mph (80+ km/h) on a 3S LiPo with no gearing change, and AWD grip puts the power down. The clipless body has molded grille, splitter, side mirrors and spoiler, plus replica brake discs with red calipers. This version comes in Black.
4-Tec 2.0 240SX is rated skill level 1 and no previous RC experience is required. Training Mode limits throttle and reverse to 50 % for new drivers, and TSM® helps keep the car straight. Battery and charger are not included. The car takes a 2S or 3S LiPo battery, NiMH is not supported, and Traxxas recommends the EZ-Peak® charger 2970.
Features
- Licensed clipless Nissan® 240SX body without post holes, with molded grille, splitter, side mirrors and spoiler and reinforced body mounts
- Replica brake discs with red calipers
- Waterproof Velineon® VX3 ESC with large aluminum heat sink, Sport, Race and Training Mode™ profiles, EZ-Set® setup and real-time telemetry via Traxxas Link™
- Velineon® V3300 brushless motor, 3300 Kv, with sintered neodymium magnets and internal cooling fan
- TQi™ Sport 2.4 GHz 2-channel radio with removable grip adapter for smaller hands, one-button programming, 30-model memory and 3-channel receiver in an O-ring sealed watertight box
- Traxxas Stability Management® (TSM), activated or deactivated directly from the transmitter
- Waterproof 2057 metal-gear servo with integrated servo saver
- Low-CG modular interlocking chassis with smooth underside
- Swiveling battery hold-down for different battery heights, without pins or clips
- Captured suspension links and dual rear camber link mounts
- Full-time shaft-driven 4WD with steel center driveshaft and center bearing support, direct drive and sealed steel-gear differentials
- Fully adjustable oil-filled Ultra Shocks™ with X-ring technology and red powder-coated springs
- Staggered high-performance street tires, larger at the rear, on six-spoke tuner wheels
- Rubber-sealed ball bearings
Included
- 4-Tec 2.0 Nissan 240SX with VX3 ESC and V3300 motor
- TQi™ Sport 2.4 GHz radio system with TSM®
- Maintenance tools
Required (not included)
- 2S or 3S LiPo battery (NiMH is not supported)
- LiPo charger, for example Traxxas EZ-Peak® 2970
- 4 x AA alkaline batteries for the transmitter
Specifications
- Scale: 1/10
- Type: On-road car, AWD
- Skill level: 1
- Top speed: 35+ mph (56+ km/h) with 2S LiPo, 50+ mph (80+ km/h) with 3S LiPo
- Length: 467 mm
- Width: 216 mm
- Track: 200 mm
- Height: 131 mm
- Wheelbase: 257 mm
- Ground clearance: 12 mm
- Weight: 1.30 kg
- Driveline: Shaft-driven AWD, direct drive
- Differentials: Sealed, hardened steel bevel gears, limited slip
- Gear pitch: 48 pitch
- Steering servo: 2057, metal gears, waterproof
- Motor: Velineon® V3300, 3300 Kv, sensorless brushless
- ESC: Velineon® VX3, brushless, waterproof, 2S–3S LiPo
- Battery: Not included (2S or 3S LiPo)
- Battery compartment: 174 x 48 x 23–26 mm
- Radio system: TQi™ Sport 2.4 GHz, 2 channels, with TSM®
