Traxxas 90154-4-BLK – Jato 4X4 BL-2s 1/8 4WD Buggy RTR – Black
1/8 scale 4WD buggy with BL-2s™ brushless power system, waterproof electronics, extreme heavy-duty parts and TQ™ 2.4 GHz radio. Battery and charger sold separately.
Jato® 4X4 combines race buggy handling with the durability of Traxxas’ toughest off-road trucks. The low-CG chassis with T-bar stiffener and optimized suspension geometry gives quick turn-in and precise handling, and the BL-2s™ brushless system delivers strong acceleration. Extreme heavy-duty C-hubs, axle carriers, steering blocks, camber and toe links and Maxx-duty driveshafts are installed from the factory, and 4.5-inch Sledgehammer® tires grip on loose surfaces. This version comes in Black.
Jato 4X4 is rated skill level 1 and no previous RC experience is required. Training Mode limits throttle and reverse to 50 % for new drivers. Battery and charger are not included. The buggy takes a 2S LiPo or a 6–7 cell NiMH battery, and Traxxas recommends the EZ-Peak® charger 2970.
Features
- Clipless body that holds tight and releases quickly, with high-downforce wing
- Extreme heavy-duty parts installed: strengthened C-hubs, axle carriers and steering blocks, one-piece camber and toe links, Maxx-duty driveshafts with 6 mm axles, 17 mm hex hubs and aluminum wheel nuts
- BL-2s™ 3300 Kv brushless motor with integrated cooling fan and ball bearings
- Waterproof BL-2s™ ESC with Sport, Race and Training Mode™ profiles, EZ-Set® setup and two-stage low-voltage detection. The heat sink accepts the accessory cooling fan 3340
- Full-size TQ™ 2.4 GHz 2-channel transmitter
- Chassis-mounted waterproof digital 2075 steering servo with dual bellcrank steering and integrated servo saver
- Modular composite tub chassis with T-bar stiffener, low-CG design, secure battery latch and high-clearance skid plate
- Heavy-duty shock towers, reinforced shock mounts, double-shear camber link connections and heavy-duty suspension arms
- Extra-long oil-filled GTR shocks with threaded collars for ride height and white powder-coated springs
- Full-time shaft-driven 4WD with sealed steel-gear differentials front and rear, large 32-pitch spur gear and heavy-duty slipper clutch
- 4.5-inch Sledgehammer® tires with foam inserts on 3-inch gray buggy wheels
- Sealed ball bearings and hex hardware with rust-resistant black oxide coating
Included
- Jato 4X4 with BL-2s ESC and 3300 Kv brushless motor
- TQ™ 2.4 GHz radio system
- Maintenance tools
Required (not included)
- 2S LiPo or 6–7 cell NiMH battery (7.2–8.4 V)
- Charger, for example Traxxas EZ-Peak® 2970
- 4 x AA alkaline batteries for the transmitter
Specifications
- Scale: 1/8
- Type: Buggy, 4WD
- Skill level: 1
- Length: 517 mm
- Width / track: 305 mm
- Height: 179 mm
- Wheelbase: 320 mm
- Weight: 2.36 kg
- Driveline: Shaft-driven 4WD, overall drive ratio 12.80:1
- Differentials: Hardened steel bevel gears, sealed, limited slip
- Gear pitch: 32 pitch
- Steering servo: 2075 digital, waterproof (125 oz-in)
- Motor: BL-2s 3300 Kv, sensorless brushless, 3 mm shaft
- ESC: BL-2s, brushless, waterproof, 6–7 cell NiMH or 2S LiPo
- Battery: Not included
- Battery compartment: 165 x 50 x 23–26 mm
- Radio system: TQ™ 2.4 GHz, 2 channels
