Traxxas 58276-74-FOX – Slash VXL 2WD Clipless 1/10 Short Course Truck RTR – FOX
1/10 scale 2WD brushless short course truck with clipless body, Velineon® VXL-3s power system, Magnum 272R™ transmission, TQi™ 2.4 GHz radio and Traxxas Stability Management (TSM®). Battery and charger sold separately.
Slash® VXL 2WD has the scale looks and dimensions of a real short course race truck and Velineon® brushless power to back them up. With a 3S LiPo and 31/76 pinion and spur gearing it reaches 60+ mph (96+ km/h), and the heavy-duty Magnum 272R™ transmission with 3.2 mm aluminum motor plate and case-supported bearings handles the power. The long 335 mm wheelbase and 89 mm of ground clearance give stability on rough tracks. This version has the FOX livery.
Slash VXL 2WD is rated skill level 2 and suits drivers with a little RC experience. Battery and charger are not included. The truck takes 6–9 cell NiMH or 2S–3S LiPo batteries, and TSM® helps keep it straight on loose surfaces.
Features
- Pre-painted clipless short course body with applied decals, scale front and rear tube bumpers and chassis nerf bars that absorb impacts and support the body
- Velineon® 3500 brushless motor with sintered neodymium magnets and precision-balanced rotor
- VXL-3s™ ESC with large heat sink, Sport, Race and Training Mode™ profiles, EZ-Set® setup and two-stage low-voltage detection for LiPo
- TQi™ 2.4 GHz 2-channel radio, Traxxas Link™ enabled, with programmable multi-function knob, dual rates, exponential and end points, and 5-channel receiver (6533) in a waterproof receiver box
- Traxxas Stability Management® (TSM), adjustable from off to 100 % from the transmitter
- Heavy-duty low-CG Magnum 272R™ transmission with 3.2 mm aluminum motor plate, case-supported bearings, fixed gear mesh and high-strength steel gears
- Sealed bevel-gear differential with easy access
- Torque-Control™ slipper clutch and heavy-duty telescoping U-joint driveshafts
- Digital high-torque waterproof Traxxas 2075 steering servo with dual bellcrank steering and integrated servo saver
- Long 335 mm wheelbase, 89 mm ground clearance and all electronics securely fastened to the chassis
- Adjustable steel turnbuckles and captured rod ends
- Fully adjustable oil-filled Ultra Shocks™ with X-ring technology and race-tuned progressive-rate white springs
- Pre-glued scale all-terrain tires with performance foam inserts on dual-profile short course wheels
- Rubber-sealed ball bearings and precision hex hardware
Included
- Slash VXL 2WD with VXL-3s ESC and Velineon® 3500 brushless motor, fully assembled
- TQi™ 2.4 GHz radio system with TSM®
Required (not included)
- 6–9 cell NiMH or 2S–3S LiPo battery
- Charger suited to the battery type
- 4 x AA alkaline batteries for the transmitter
Specifications
- Scale: 1/10
- Type: Short course truck, 2WD
- Skill level: 2
- Top speed: 60+ mph (96+ km/h) with 3S LiPo and 31/76 gearing
- Length: 568 mm
- Width / track: 296 mm
- Height: 214 mm
- Wheelbase: 335 mm
- Ground clearance: 89 mm
- Weight: 2.56 kg
- Transmission: Magnum 272R™, internal gear ratio 2.72:1 (final drive 10.2:1)
- Differential: Sealed bevel gear
- Gear pitch: 48 pitch
- Steering servo: 2075 digital high-torque, waterproof
- Motor: Velineon® 3500, sensorless brushless, 3 mm shaft
- ESC: VXL-3s™, brushless
- Battery: Not included (6–9 cell NiMH or 2S–3S LiPo)
- Battery compartment: 165 x 49.5 x 23–25 mm
- Radio system: TQi™ 2.4 GHz, 2 channels, with TSM®
