Traxxas 83124-4 – 4-Tec 2.0 BL-2s 1/10 AWD Brushless Chassis RTR
1/10 scale AWD brushless on-road chassis with BL-2s™ power system and TQ™ 2.4 GHz radio, ready for your own 200 mm body. Body, battery and charger sold separately.
The 4-Tec® 2.0 BL-2s chassis is a ready-to-run on-road platform for drivers who want to choose their own body. It accepts most 200 mm bodies, the wheelbase can be lengthened or shortened by 3 mm, and the BL-2s brushless system gives a top speed of 40+ mph (64+ km/h). The low modular chassis with smooth underside, sealed differentials and fully adjustable Ultra Shocks™ give precise handling on asphalt.
4-Tec 2.0 BL-2s is rated skill level 1 and no previous RC experience is required. Body, battery and charger are not included. The chassis takes a 7-cell NiMH flat pack or a 2S LiPo battery with Traxxas High-Current Connector, and Traxxas recommends the EZ-Peak® Plus charger 2970.
Features
- Accepts most 200 mm on-road bodies, wheelbase adjustable by 3 mm
- BL-2s 3300 Kv brushless motor with integrated cooling fan and efficient ball bearings
- BL-2s™ brushless ESC with Sport, Race and Training Mode™ profiles, EZ-Set® setup and two-stage low-voltage detection for LiPo, heat sink accepts cooling fan 3340
- TQ™ 2.4 GHz 2-channel radio
- High-torque waterproof Traxxas 2075 servo with servo saver integrated in the servo horn, high steering angle option
- Low modular interlocking chassis with smooth underside and angled front bumper
- Swiveling battery hold-down for different battery heights, without pins or clips
- Captured suspension links, dual rear camber link mounts and adjustable droop
- Full-time shaft-driven 4WD with steel center driveshaft and center bearing support, direct drive
- Sealed, silicone-filled differentials
- Fully adjustable oil-filled Ultra Shocks™ with X-ring technology and red powder-coated springs
- Replica brake discs with red calipers, mountable in forward or trailing position
- Staggered street tires, larger at the rear, on black chrome multi-spoke wheels with lug nut detail
- Rubber-sealed ball bearings
Included
- 4-Tec 2.0 BL-2s chassis with BL-2s ESC and 3300 Kv brushless motor
- TQ™ 2.4 GHz radio system
- Quick start guide and maintenance tools
Required (not included)
- 200 mm on-road body
- 7-cell NiMH flat pack or 2S LiPo battery with Traxxas High-Current Connector
- Charger, for example Traxxas EZ-Peak® Plus 2970
- 4 x AA alkaline batteries for the transmitter
Specifications
- Scale: 1/10
- Type: On-road chassis, AWD
- Skill level: 1
- Top speed: 40+ mph (64+ km/h)
- Length: 379 mm
- Width: 200 mm
- Height: 62 mm
- Track: 196 mm front, 200 mm rear
- Wheelbase: 256 mm
- Ground clearance: 9 mm
- Weight: 1.28 kg
- Driveline: Shaft-driven AWD, single speed direct drive
- Differentials: Sealed, hardened steel bevel gears, limited slip
- Gear pitch: 48 pitch
- Steering servo: 2075 digital high-torque, waterproof
- Motor: BL-2s 3300 Kv, sensorless brushless, 3 mm shaft
- ESC: BL-2s™, brushless
- Battery: Not included (7-cell NiMH flat pack or 2S LiPo)
- Battery compartment: 158 x 46 x 23–26 mm
- Body: Not included (200 mm)
- Radio system: TQ™ 2.4 GHz, 2 channels
